在建筑施工過程中，經常需要木工施工等。施工作業通常在建筑物附近進行。建筑施工過程中，高空墜物隨時可能對施工人員造成人身傷害。因此，在施工現場進行施工作業時，需要搭建防護棚，對施工人員進行保護。下面來講講木工加工棚現場搭設指導內容吧。

In the construction process, woodworking is often required. Construction work is usually carried out near buildings. During construction, falling objects may cause personal injury to construction personnel at any time. Therefore, it is necessary to set up safety protection shed to protect construction personnel during construction on the construction site. Now let's talk about the guidance content for the on-site erection of woodworking shed.

一：木工加工棚等的搭設既要滿足規范和應用的要求，又要防雨、防風、防砸、整齊美觀，并懸掛宣傳標語;

1： The erection of woodworking shed shall not only meet the requirements of specification and application, but also be rain proof, wind proof, smash proof, neat and beautiful, and hang safety slogans;

二：圍繞塔吊和建筑物周邊搭建的木工加工棚,鋼筋加工棚,工地加工棚須設置雙層硬質防護頂；

2： The woodworking shed, reinforcement processing shed and site processing shed built around the tower crane and the building must be provided with double-layer hard protective roof;

三：防護棚頂及側邊為藍色，長軸方向兩側立防護欄桿進行遮擋。防護欄桿應涂上紅色和白色(黑色和黃色)警示色；

3： The roof and side of the protective shed are blue, and protective railings are erected on both sides of the long axis for shielding. Protective railings shall be painted with red and white (black and yellow) warning colors;

四：防護棚兩端應涂有中建標志和加工棚名稱。“注意機械傷害”標志掛在面向施工道路的加工棚右側屋檐下，面向施工道路。

4： Both ends of the protective shed shall be painted with the construction in progress sign and the name of the processing shed. The sign of "Attention to Mechanical Injury" is hung under the eaves on the right side of the processing shed facing the construction road, facing the construction road.

木工加工棚的搭設不僅要滿足規范和使用要求,而且防雨、防風、防砸、整潔美觀,并掛中建宣傳標語，木工加工區地面應進行硬化處理。

The erection of woodworking shed shall not only meet the specification and use requirements, but also be rainproof, windproof, smashing proof, neat and beautiful, and be hung with safety slogans of CSCEC. The ground of woodworking area shall be hardened.

以上就是為你介紹的木工加工棚的構造及其安裝步驟，希望對您有所幫助，如您需要我公司產品，請關注我們網站http://www.afonec.net進行聯系！

The above is the structure and installation steps of the woodworking shed introduced to you. I hope it will be helpful to you. If you need our products, please pay attention to our website http://www.afonec.net Get in touch!